Contact: Liu Zhaochang
Phone: +86-15269656857
Email: info@sanyangwaterproof.com
Address: Nanfu, Beiyangtou Village, Taitou Town, Shouguang City, Weifang City, Shandong Province
Quickly Find The Product You Need
Modified asphalt polyethylene tire waterproofing membrane
- Product Description
-
Product Overview
Modified asphalt polyethylene tire waterproofing membrane is a waterproof material made of high-density polyethylene film as the base, modified asphalt or self-adhesive asphalt on the upper and lower sides, and insulation material covering the surface. Suitable for waterproofing engineering of non exposed buildings and infrastructure.Product Features
This product has good density, impermeability, and root puncture resistance, making it suitable for planting and waterproofing projects with high water vapor content; More than 120% elongation, suitable for building waterproofing projects with large settlement deformation and susceptibility to vibration; Strong corrosion resistance, even if immersed in acidic, alkaline, and saline water for a long time, the waterproof performance and durability are not affected.Product Classification
The fetal body is a polyethylene membrane fetal body (E);
According to the construction process of the product, it is divided into hot melt type (T) and self-adhesive type (S);
Hot melt products are divided into four categories based on the composition of the modifier: modified oxidized asphalt waterproofing membrane (o), butadiene styrene rubber modified oxidized asphalt waterproofing membrane (M), polymer modified asphalt waterproofing membrane (P), and polymer modified asphalt root puncture resistant waterproofing membrane (R);
The isolation material on the upper and lower surfaces of the hot melt coil is polyethylene film (E); The isolation material on the upper and lower surfaces of self-adhesive rolls is anti stick material (E).Specifications and Dimensions
Thickness: Hot melt type: 3mm, 4mm, including 4mm for root puncture resistant rolls; Self adhesive type: 2mm, 3mm.
Width: 1000mm, 1100mm.
Area: Each roll has an area of 10m ° and 11m °. Other specifications of roll materials can be determined through negotiation between the supply and demand parties.Product Identification
Roll materials are marked in order of construction technology, product type, carcass, upper surface covering material, thickness, and standard number. The 3.0mm thick hot-melt polyethylene tire polyethylene film coated with high polymer modified asphalt waterproofing membrane should be marked as: TPEE3 GB18967-2009
Get A Quote
Phone/whatsapp